Zoom A3 Operation Manual page 23

2
To change mic input settings
• Turn to select MIC.
• Press .
• Turn to select the item to set.
• Press .
• Turn to change the setting.
PHANTOM settings
HINT
• PHANTOM : Set the phantom power voltage.
• LOW CUT :
• MIC PHASE : Set the phase of the mic input signal.
NOTE
• If you press
• Some condenser mics will not work with the +24V phantom power setting. This uses less power than the
+48V setting, though, so it can help when using batteries.
LOW CUT settings
To reduce low-frequency noise, select a frequency band to cut.
to exit the PHANTOM page, the selected setting will become active.
SETTINGS
MIC PHASE settings
NEXT
23