Table of Contents
Advertisement
Operation Manual
T h a n k y o u f o r s e l e c t i n g t h e Z O O M M O D E L I N G G U I TA R
AMPLIFIER FIRE-18 (simply called the "FIRE-18" in this manual).
Please take the time to read this manual carefully so as to get the most
out of this product and to ensure optimum performance and reliability.
Please keep this manual in a convenient place for future reference.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
USAGE AND SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . 2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Controls and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
◆
Input/preamplifier section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
◆
Effect section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
◆
Patch section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
◆
Output/control section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using the FIRE-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Using effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Loading and storing patches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
◆
Loading a patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
◆
Storing a patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the built-in tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Switching the mode with the foot switch . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Drive Types and Effect Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
■ DRIVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
■ ZNR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
■ MODULATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
■ DELAY/REVERB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Patch List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Introduction
Contents
. . . . . . . .15
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Zoom FIRE-18
Summary of Contents for Zoom FIRE-18
-
Page 1: Table Of Contents
Using the FIRE-18 ........ -
Page 2: Usage And Safety Precautions
Keep a minimum distance of 5 cm around the unit for sufficient ventilation. Do not impede the ventilation openings with objects such as newspapers or curtains. Warning • Handling • Never place objects filled with liquids, such as vases, on the FIRE-18 since this can cause Warning ZOOM FIRE-18... -
Page 3: Usage Precautions
Also take care not to drop the unit, and do not subject it to shock or excessive pressure. Caution • Alterations Never open the case of the FIRE-18 or attempt to modify the product in any way since this can result in damage to the unit. Warning •... -
Page 4: Features
The FIRE-18 is a guitar amplifier with the following features. • Versatile guitar amplifier and compact effect sound modeling The FIRE-18 lets you select from 22 drive (distortion) types which faithfully duplicate the sound of famous guitar amplifiers and compact effects. The available choices range from vintage amps to modern sharp distortion, covering every need. -
Page 5: Controls And Functions
Adjusts the volume after passing the preamplifier. (6) [INPUT] jack Connect the electric guitar here, using a dedicated instrument cable. (7) [BOOST] key Setting this key to ON (LED lit) boosts the sound pressure level. ZOOM FIRE-18 Output/control section Effect section Controls and Functions (10) -
Page 6: Effect Section
(10) [BOTTOM] key Setting this key to ON (LED lit) emphasizes the low frequencies. ◆ Effect section This section controls the built-in digital effects. The FIRE-18 provides modulation effects and delay/reverb effects. (1) [MODULATION] key Switches the modulation effect on and off. -
Page 7: Output/Control Section
(3) Display Shows the number of the currently selected patch, or the value of setting parameters of the FIRE-18. (4) [Q]/[W] keys Serve to switch between patches and to adjust ZNR (ZOOM Noise Reduction). (5) [STORE] key Stores the current settings as a user patch. -
Page 8: Connections
To toggle between manual mode and program mode with your foot, connect the separately available foot switch ZOOM FS-01 here. To record the output of the FIRE-18, connect the recording device such as the ZOOM MRS-1266 to the [RECORDING/PHONES] jack. Connections... -
Page 9: Using The Fire-18
To change the ZNR (ZOOM Noise Reduction) setting, press the [ZNR] key. The LED of the key flashes, and the current setting (Z1 – Z9, oF) is shown for about 2 seconds on the display. -
Page 10: Using Effects
Using the FIRE-18 Using effects Immediately after turning on the FIRE-18, the [MANUAL] key LED is lit, and the internal effects (modulation, delay/reverb) are off. This section explains how to activate the effects and use them to achieve various kinds of sound. -
Page 11: Loading And Storing Patches
VALUE [Q]/[W] keys to change the effect type and/or setting value. Loading and storing patches The FIRE-18 offers a bank of ten read/write user patches (U) and two banks of ten read-only preset patches (A, b). Patches in each bank are numbered 0 - 9. -
Page 12: Storing A Patch
Using the FIRE-18 In program mode, the knobs and controls on the panel become inactive, and the settings of the patch shown on the display are enabled. Use the [Q]/[W] keys to select the bank and number of the desired patch. -
Page 13: Using The Built-In Tuner
By calling up an existing patch and then selecting another destination for the store process, copying a patch is possible. Using the built-in tuner The FIRE-18 incorporates an auto-chromatic tuner which can be activated by pressing the [TUNER] key. Press the [TUNER] key in the patch section. -
Page 14: Switching The Mode With The Foot Switch
Using the separately available foot switch, you can toggle between manual mode and program mode during play. Turn off power to the FIRE-18 and connect the foot switch FS-01 (available separately) to the [FOOT SW] jack. Pitch is sharp Correct pitch Pitch is flat The higher the rotation speed, the more the pitch is off. -
Page 15: Returning The Fire-18 To The Factory Default Settings (All Initialize)
The FIRE-18 is in manual mode. Press the foot switch while you are playing your instrument. When you push the foot switch, the FIRE-18 switches to program mode, and the currently selected patch becomes active. If required, use the [PROGRAM/BANK] key and [ switch the bank and patch number. -
Page 16: Drive Types And Effect Types
Tube stack amp drive sound in the heavy metal style 9002 ZOOM original 9002 sound Z POWER ZOOM original powerful amp sound Sound of dry overdrive effect connected to VINTAGE OD combo amp Sound of fully revved up distortion effect... -
Page 17: Znr
STANDARD VINTAGE PLAIN STANDARD ■ ZNR This is ZOOM's original noise reduction which suppresses noise during play pauses. Use the [ZNR] key to turn the function on and off, and use the [ Setting value ■ MODULATION This effect adds body and modulation to the guitar sound. Use the [MODULATION] key to turn the effect on and off, and use theVALUE [ value. - Page 18 Serial connection of auto wah and chorus. Higher setting values result in higher auto wah start sensitivity (Chorus depth is fixed) This effect causes random pitch changes and creates an auto arpeggio-like sound. Higher setting values result in faster sound change ZOOM FIRE-18...
- Page 19 (P1 – P9) PITCH RING MOD ZOOM FIRE-18 Serial connection of step and chorus. Higher setting values result in faster sound change (Chorus rate and depth is fixed) This effect slows down the sound attack speed, resulting in the impression of “violin playing”.
-
Page 20: Delay/Reverb
Higher setting values result in longer delay time. The mix/ feedback amount is set to an optimum value This effect simulates reverberation in a room. Higher values result in a deeper effect This effect simulates reverberation in a hall. Higher values result in a deeper effect ZOOM FIRE-18... -
Page 21: Specifications
2-position 7-segment LED Display Dimension 400 mm (W) x 205 mm (D) x 380 mm (H) Weight 10 kg Power Cord Included Items *0 dBm = 0.775 Vrms *Design and specifications subject to change without notice. ZOOM FIRE-18 Specifications Specifications... -
Page 22: Troubleshooting
• Is power cord correctly plugged into AC outlet? • Is [POWER] switch set to ON? • No sound, or low volume. • Is the guitar correctly connected to the FIRE-18? See page 8 for information on connections. • Is something plugged into the [RECORDING/PHONES] jack? If something is plugged into the [RECORDING/PHONES] jack, the speaker is automatically cut off. -
Page 23: Patch List
TB DIST Crispy, useful jet sound MP 1 Amp sound with hard distortion and quick response MP 1 Variation of vintage original ZOOM sound 9002 Powerful fuzz sound for backing and lead WILD FUZZ Chorus & delay sound for clean lead... - Page 24 Thank you for selecting the ZOOM FIRE-18M. This product is a modified version of the popular Modeling Guitar Amplifier FIRE-18. It incorporates all the functions of the FIRE-18 and adds a built-in mic for picking up the sound of the speaker, and a set of direct output jacks. This document explains functions and specifications that have been added or changed.
-
Page 25: Troubleshooting
Rated output level +4dBm with output load impedance 10 kilohms or more Unbalanced output Standard stereo phone jack Rated output level +4dBm with output load impedance 10 kilohms or more * 0 dBm = 0.775 Vrms * Design and specifications are subject to change without notice. ZOOM FIRE-18M...