Zoom A3 Operation Manual page 11

3
To select an effect type
• Press or
• The effect type changes.
HINT
• See the section starting on page 34 for information about effect types and parameters.
NOTE
• A model type can only be selected for Effect 1.
Effect processing capacity
The
effect types that require great amounts of processing power, the available
processing capacity might not be enough. If the processing required for an effect
exceeds the available capacity, the effect is bypassed and a "DSP Full!" message
appears. This can be avoided by changing 1 or more of the effect types or setting
them to THRU.
NOTE
• An effect requires the same amount of processing power whether it is ON or OFF .
.
allows you to combine 3 effects as you like. However, if you combine
EDIT
NEXT
11