Manage Preset Messages; Long Message Reassembly; Phone Setup Options - Kyocera Sprint DuraCore User Manual

1. In standby mode, press MESSAGING (left softkey) > OPTIONS (right softkey) >
Signature.
2. Select On. (If you do not wish to attach a signature to your outgoing messages, select
Off.)
3. Enter a signature and press

Manage Preset Messages

Your phone is loaded with 20 preset messages to help make sending messages easier.
Customize or delete these messages, such as ―Where are you?,‖ ―Let's get lunch,‖ and ―Meet
me at‖ to suit your needs, or add your own messages to the list.
To edit or delete a preset message:
1. In standby mode, press MESSAGING (left softkey) > OPTIONS (right softkey) > Preset
Messages. The list of preset messages will be displayed.
2. To edit or delete a message, highlight it and press OPTIONS (right softkey).
3. Select Edit, edit the message, and press
– or –
Select Delete > YES (left softkey) to delete the message. (You can also reset all
messages by selecting Reset all messages > YES [left softkey].)
To change the language of the preset message:
1. In standby mode, press MESSAGING (left softkey) > OPTIONS (right softkey) > Preset
Messages.
2. Press OPTIONS (right softkey) > Select Language.
3. Select English or Spanish.

Long Message Reassembly

When you receive a long message, it is divided into up to 15 messages and delivered to your
phone. You can choose to combine them to display as one message rather than segmented
ones.
1. In standby mode, press MESSAGING (left softkey) > OPTIONS (right softkey) > Long
Message Re-assembly.
2. Select On or Off.

Phone Setup Options

Navigation Key Shortcuts
Settings
.
.
56