Relation Between System Configuration And Ih Output - Toshiba e-studio3511, e-studio4511 Manual

16.4.4 Relation between system configuration and IH output

for NAD, SAD, TWD:
System configuration Warming up
Equipment only
Equipment and 1160-1300W
RADF (*1)
Equipment, RADF (*1)
and FIN
1160-1260W
(*1)
Equipment, RADF ,
FIN, and HPU
(*1)
Equipment, RADF ,
FIN, HPU and LCF
(*1)
Equipment, RADF , 1140-1240W
FIN, HPU, LCF and
FAX
for ASD, AUD, CND:
System configuration Warming up
Equipment only
Equipment and 1160-1300W
(*1)
RADF
(*1)
Equipment, RADF
and FIN
1160-1260W
Equipment, RADF (*1) ,
FIN, and HPU
Equipment, RADF (*1) ,
FIN, HPU and LCF
Equipment, RADF (*1) , 1140-1240W
FIN, HPU, LCF and
FAX
* RADF: Reversing automatic document feeder, FIN: Finisher, HPU: Hole punch unit, LCF: Large
capacity feeder, FAX: FAX unit
(*1) The wattage lowers 50 W more when the scanning is performed from the RADF during warming up.
(*2) AC power should be input voltage when the equipment is warming up (The lower the voltage is, the
longer the warming up time becomes).
November 2003 © TOSHIBA TEC
Energy saving
(*2)
Ready Printing
1080W
1020W
960W
800W
940W
Energy saving
(*2)
Ready Printing
1240W
1180W
1120W
700W
1100W
16 - 7 e-STUDIO3511/4511 FUSER UNIT/PAPER EXIT SECTION
04/10
Automatically
mode OFF
OFF
800W
Automatically
mode OFF
OFF
700W
Warming up
time
Approx
40 sec.
Warming up
time
Approx
40 sec.
16