Disassembly And Replacement - Toshiba e-studio3511, e-studio4511 Manual

6.7 Disassembly and Replacement

[A] Original glass
(1) Take off the right upper cover ( Chapter 2.5.1
[J]).
(2) Remove 2 screws and take off the fixing
bracket.
6
(3) Remove the original glass.
[B] Lens cover
(1) Remove the original glass ( Chapter 6.7 [A]).
(2) Disconnect 1 connector, remove 5 screws and
take off the lens cover.
[C] SLG board cooling fan
(1) Take off the lens cover ( Chapter 6.7 [B]).
(2) Disconnect 1 connector, remove 2 screws and
take off the SLG board cooling fan.
e-STUDIO3511/4511 SCANNER
Fixing bracket
Fig. 6-701
Original glass
Fig. 6-702
Connector
Lens cover
Fig. 6-703
Fig. 6-704
6 - 16 November 2003 © TOSHIBA TEC