Attaching The Waste Chip Box; Storing The Accessory Box; Standard Accessories; Storing The Needle Threader - Janome MyLock 644D Instruction Book

10

Attaching the Waste Chip Box

Insert the hook into groove on looper cover.
Groove
Looper cover
Waste chip box
Hook

Storing the Accessory Box

Insert the accessory box into the waste chip box.
Waste chip box
Accessory box

Standard Accessories

Screwdriver (Large)
Screwdriver (Small)
Tweezers
Set of needles No.11, No.14
Nets
Spool holder caps
Lint brush
Needle threader
Oil
Spreader
Spanner
Upper knife

Storing the Needle Threader

You can store the attached needle threader inside of
the looper cover in the holder.
The holder is very convenient. You can use the
needle threader whenever you desired if it is stored in
the holder after using the needle threader. Place the
hollow part of the needle threader into the notch on
the holder and store.
Looper cover
Holder
Notch
Needle threader