Corded Buttonhole - Janome Sewing Machine Instruction Book

1 2 3
1
2
3
q

Corded Buttonhole

Machine Setting
1 Stitch Pattern
4
5
2 Stitch Length
3 Stitch Width
4 Thread Tension : 1-5
5 Presser foot
z With the buttonhole foot is raised,
x Lower the needle into the garment
c Remove the fabric from the machine,
29
: (BH)
: 0.5-1
: 5
: Buttonhole foot
hook the cord on the cord spur at the
back of the buttonhole foot.
q Spur
Bring the ends toward you under the
buttonhole foot until they clear the
front end.
Hook the filler cord into the forks on
the front of foot to hold thhem tight.
where the buttonhole will start and
lower the foot.
Depress the foot control gently and
sew the buttonhole.
Each side of the buttonhole and the
bartacks will be shown over the cord.
The sewing process is the same as
the ordinary buttonhole
(see page 27).
and cut the sewing threads.
Pull the left end of the filler cord to
tighten it.
Thread the end through a darning
needle, draw to the other side of the
fabric and cut.