Table of Contents
Advertisement
FS-8700-54 MDA CM4
2.2.4 Client Side Map Descriptors
Section Title
Map_Descriptros
Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Location
Function
Node_Name
Data_Type
Length
Address
Scaling
Data_Array_Low_Scale*
Data_Array_High_Scale*
Node_Low_Scale*
Node_High_Scale*
* 0 If Unit Status, System Information.
0, 1, 2, 3 If Current Point Status.
Example:
//
Client Side Map Descriptors
//
Map_Descriptors
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_Name, Data_Type, Address
CMD_AI_01,
CMD_AI_02,
CMD_AI_03,
CMD_AI_04,
CMD_AI_11,
CMD_AI_21,
*->
Current Point Status
**->
System Information
FieldServer Technologies 1991 Tarob Court, Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042
Visit our website: www.fieldserver.com
Function
Name of this Map Descriptor
Name of Data Array where data is
to be stored in the FIeldServer
Starting location in Data Array
Function of Client Map Descriptor
Name of Node to fetch data from
Data type
Length of Map Descriptor
Starting address of read block
If scaling is required
Scaling zero in Data Array
Scaling max in Data Array
Scaling zero in Connected Node
Scaling max in Connected Node
DA_AI_01,
0,
DA_AI_02,
0,
DA_AI_03,
0,
DA_AI_04,
0,
DA_AI_11,
0,
DA_AI_21,
0,
Up to 15 alphanumeric characters
One of the Data Array names from
"Data Array" section above
0 to maximum specified in "Data
Array" section above
RDBC, WRBC, WRBX
One of the node names specified in
"Client Node Descriptor" above
Current Point Status, Unit Status,
System Information
1 - 100
0, 1, 2, 3 *
-32767 to 32767, default 0
-32767 to 32767, default 100
-32767 to 32767, default 0
-32767 to 32767, default 100
RDBC,
CN_CM4_1,
RDBC,
CN_CM4_1,
RDBC,
CN_CM4_1,
RDBC,
CN_CM4_1,
RDBC,
CN_CM4_1,
RDBC,
CN_CM4_1,
E-mail: support@fieldserver.com
Page 4
Driver Manual
Legal Values
CPS*,
0
CPS*,
1
CPS*,
2
CPS*,
3
Unit Status, 0
SI**,
0
Advertisement
Table of Contents
