Scan Resume Condition; Scan Operation - Icom IC-40S Instruction Manual

4

SCAN OPERATION

Scan resume
condition
The scan resume condition can be selected as a pause or
timer scan.
q Push [LOW] for 2 sec. to enter
set mode.
w Push [LOW] several times
until "SC" appears.
e Push [Y] or [Z] to select the
scan resume timer.
- "t-05" : Scan pauses 5 sec.
while receiving a signal.
- "t-10" : Scan pauses 10 sec.
while receiving a signal.
- "t-15" : Scan pauses 15 sec.
while receiving a signal.
- "P-05" : Scan pauses until the
signal disappears and
then resumes 5 sec.
thereafter.
r Push [LOW] for 2 sec. to exit
set mode.
10
[
Pauses until the signal
disappears.
15 sec. timer for resume
condition.
10 sec. timer for resume
condition.
5 sec. timer for resume
condition.