Settings (4) - Husqvarna Automower 230 ACX Operator's Manual

Advanced (3-4)
• Drive past wire (3-4-1)
The front of Automower
boundary wire by a specific distance before the
mower turns. The default distance is 27 cm, but
this can be changed if required. The minimum
value is 15 cm and the maximum value is 50 cm.
To adjust the distance: Move the cursor to Drive
past wire and press YES. Now specify the
number of centimetres you want Automower
pass the boundary wire.
• Ground Speed (3-4-2)
When Automower ®
the recommended maximum area, the speed
can be reduced. The advantage of this is
reduced wear on the mower and somewhat more
even speed on steep hills.
To change the speed: Set the marker to Ground
Speed and press YES. Then choose between
Normal and Reduced speed by moving the
marker to your selection and pressing YES.
(Speed setting not available on 220 AC)

6.6 Settings (4)

From this option in the main menu you access the
settings.
• Security (4-1)
to make settings concerning PIN code, time lock
and alarm. The PIN code must be specified for
the Security menu to be shown.
• Sounds (4-2)
to activate/deactivate audio messages for mower
activities and to activate/deactivate keypad
sounds.
• Language (4-3)
to select the menu language.
• Time and date (4-4)
to set the current time and day as well as the
required time and date format.
6. MENU FUNCTIONS
® always passes the
is run on areas smaller than
Exit angles
Follow loop
Installation shape
® to
Advanced
Exit angles
Follow loop
Installation shape
Advanced
Commands
Timer
Installation
Settings
Drive past wire
Ground Speed
3-4
Drive past wire
Ground Speed
3-4
Security
Sounds
Language
4
Time and date
3-4-1
3-4-2
4-
English - 57