Casablanca at1008 Owner's Manual page 6

STANDARD STyLE
STANDARD STYLE BLADE HOLDER & BLADE
Step 8. Standard Style
Attach the blades to the blade
holders with the three blade
screws and felt washers provided
for each blade.
Hand tighten securely.
Install the assembled blade and
blade holder to the flywheel (round
holes) or direct drive motor.
Hand tighten securely.
Repeat for each assembly.
warning: To reduce the risk of personal injury, do not bend blade holders when installing,
balancing, or cleaning. do not insert foreign objects between rotating fan blades.
6
BLADE HOLDERS & HARDWARE
blade holder screW
(2 per blade)
blade holder
SCREw
(2 per blade
holder)
fiber Washer (not
BLADE SCREw
included in daMp
(3 per blade)
BLADE SCREw
(3 per blade)
felt Washer
(3 per blade)
BLADE
Your fan is equipped with a flywheel
that allows for both 4 and 5 blade in-
stallation. The screw holes surrounded
by squares are for 4 blade installation,
while the screw holes in circles are for
5 blade installation as shown above.
LOCATION FANS)