Location Of Controls - Roadstar CLR-2510 Instruction Manual

WARNINGS
The exclamation point within the triangle is a warning sign alerting
the user of important instructions accompanying the product.
The lightening flash with arrowhead symbol within the triangle is
a warning sign alerting the user of "dangerous voltage" inside the
unit.
To reduce the risk of electric shock, do not remove the cover.
No user serviceable parts inside the unit. Refer all servicing to
qualified personnel.
This unit operates on 230V ~ 50Hz. If the unit is not used for a
long period of time, remove the plug from the AC mains.
This unit must not be exposed to moisture or rain.
The power switch in this unit is mounted on the secondary circuit
and does not disconnect the whole unit from the mains in OFF
position.
Ensure all connections are properly made before operating the
unit.
This unit should be positioned so that it is properly ventilated.
Avoid placing it, for example, close to curtains, on the carpet or
in a built-in installation such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.
Make sure the battery is inserted according to the proper
polarity. Do not mix old batteries with new ones.
If the unit is not used for a long period of time (more than 1
month), remove the battery from its compartment to avoid
possible leaking.
English 1 2
CLR-2510
FM/MW DIGITAL ALARM CLOCK RADIO

LOCATION OF CONTROLS

1. FUNCTION Selector
2. HOUR SET Button
3. MINUTE SET B utton
4. ALARM SET Button
5. ALARM OFF Button
6. CLOCK Display (24 hours mode)
7. SNOOZE Button
8. BAND Selector
9. TUNING Control
10. VOLUME Control/Buzzer
11. TIME SET Button
12. BATTERY Compartment
13. SLEEP SET Button
English
(ON/OFF/AUTO)