Midi Remote Control; Overview; Mapping - RME Audio HDSPe MADI FX User Manual

28. MIDI Remote Control

28.1 Overview

TotalMix can be remote controlled via MIDI. It is compatible to the widely spread Mackie Control
protocol, so TotalMix can be controlled with all hardware controllers supporting this standard.
Examples are the Mackie Control, Tascam US-2400 or Behringer BCF 2000.
Additionally, the stereo output faders (lowest row) which are set up as Main Out in the Control
Room section can also be controlled by the standard Control Change Volume via MIDI chan-
nel 1. With this, the main volume of the Fireface is controllable from nearly any MIDI equipped
hardware device.
MIDI remote control always operates in View Submix mode, even when the View Option Free is
currently selected in TotalMix FX.

28.2 Mapping

TotalMix supports the following Mackie Control surface elements*:
Element:
Channel faders 1 – 8
Master fader
SEL(1-8) + DYNAMICS
V-Pots 1 – 8
pressing V-Pot knobs
CHANNEL LEFT or REWIND
CHANNEL RIGHT or FAST FORWARD
BANK LEFT or ARROW LEFT
BANK RIGHT or ARROW RIGHT
ARROW UP or Assignable1/PAGE+
ARROW DOWN or Assignable2/PAGE-
EQ
PLUGINS/INSERT
STOP
PLAY
PAN
FLIP
DYN
MUTE Ch. 1 – 8
SOLO Ch. 1 – 8
SELECT Ch. 1 – 8
REC Ch. 1 – 8
RECORD
F1 - F8
F9
F10 - F12
*Tested with Behringer BCF2000 Firmware v1.07 in Mackie Control emulation for Steinberg mode and with Mackie
Control under Mac OS X.
70
Meaning in TotalMix:
volume
Main Out channel fader
Activate Trim mode
pan
pan = center
move one channel left
move one channel right
move eight channels left
move eight channels right
move one row up
move one row down
Master Mute
Master Solo
Dim Main Out
Talkback
Mono Main Out
Speaker B
TrimGains
Mute
Solo
Select
select output bus (Submix)
Recall
load Snapshot 1 - 8
select Main Out
select Cue Phones 1 - 3
User's Guide HDSPe MADI FX © RME