Driver And Firmware; Driver Installation; Driver Update; De-Installing The Drivers - RME Audio HDSPe MADI FX User Manual

10. Driver and Firmware

10.1 Driver Installation

After the HDSPe MADI FX has been installed correctly (see 5. Hardware Installation), and the
computer has been switched on, Windows will recognize the new hardware component and
start its 'Hardware Wizard'. Insert the RME Driver CD into your CD-ROM drive, and follow fur-
ther instructions which appear on your computer screen. The driver files are located in the di-
rectory \HDSPe FX on the RME Driver CD.
Windows now installs the driver of the HDSPe card and registers it
as audio device. After a reboot, the symbols of TotalMix FX and the
card's Settings dialog will appear in the task bar.
In Windows 7 Microsoft removed the automatic start of the Driver Software Update dialog. The-
refore this dialog has to be started manually after the failed driver installation. Hit the Win key,
type 'Device Manager', start the Device Manager by selecting it from the list and hit Enter.
The FX card is shown with a yellow warning symbol. Usually it is already found in the correct
category, Sound, Video and Game Controller (Plug & Play detects a multimedia device). Right
click on the device and select 'Update Driver Software' from the context menu.
The dialog Update Driver Software appears. Now follow the instructions given below.

10.2 Driver Update

When facing problems with the automatic driver update, the user-driven way of driver installa-
tion will work.
Under >Control Panel /System /Device Manager /Sound, Video and Game Controllers /RME
HDSPe MADI FX /Properties /Driver< you'll find the 'Update Driver' button.
XP: Select 'Install from a list or specific location (advanced)', click 'Next', select 'Don't
search I will choose the driver to install', click 'Next', then 'Have Disk'. Now point to the
driver update's directory.
Vista/7: Select 'Browse my computer for driver software', then 'Let me pick from a list of
device drivers from my computer', then 'Have Disk'. Now point to the driver update's direc-
tory.
This method also allows for the installation of older drivers than the currently installed ones.

10.3 De-Installing the Drivers

A de-installation of the HDSPe driver files is not necessary – and not supported by Windows
anyway. Thanks to full Plug & Play support, the driver files will not be loaded after the hardware
has been removed. If desired these files can then be deleted manually.
Unfortunately Windows Plug & Play methods do not cover the additional autorun entries of To-
talMix, the Settings dialog, and the registration of the ASIO driver. Those entries can be re-
moved from the registry through a software de-installation request. This request can be found
(like all de-installation entries) in Control Panel, Software. Click on the entry 'RME HDSPe FX
(WDM)'.
User's Guide HDSPe MADI FX © RME
12