Printing On Different Types Of Paper Thickness; Feed Roller Pressure Lever - Ricoh DX 2330 Operating Instructions Manual

Operation
Printing on Different Types of Paper
Thickness
1
Depending on the thickness of the pa-
per that you are printing on, you need
to perform the following steps.

Feed Roller Pressure Lever

A
Shift the feed roller pressure le-
ver to the Thick or Standard paper
position.
Note
❒ Shift the lever according to the
paper weights as shown in the
following table.
Thick 81.6–127.9
Stand
ard
❒ If the feed roller pressure lever
is at the Standard paper posi-
tion, and paper misfeeds occur
even though you are using pa-
per within the specified range,
move the lever to the Thick pa-
per position.
28
Metric Inch
version version
21.7–34.0 lb.
2
g/m
2 9.3–21.6 lb.
35–81.5 g/m
B
Make sure that the paper feed
side plates touch the paper light-
ly.
C
When you have finished printing,
shift the feed roller pressure lever
back to the Standard paper posi-
tion.