Replenishing Supplies; Loading Paper Into The Paper Feed Tray; Replenishing Paper - Ricoh DX 2330 Operating Instructions Manual

3. Replenishing Supplies

Loading Paper into the Paper Feed Tray

The Load Paper indicator (B) and the
machine indicator "A" lights when
the paper feed tray runs out of paper.

Replenishing Paper

A
Press the {Clear/Stop} key.
Note
❒ This step is necessary only if
you want to pause a print run to
replenish paper.
B
Lower the paper feed tray adjust-
ment lever.
Note
❒ The top sheet of paper might re-
main between the feed rollers.
In this case, remove the top
sheet.
C
Load paper into the paper feed
tray.
Note
❒ Correct paper curl before set-
ting the paper.
D
Shift the tray adjustment lever to
AQP010S
the paper feeding position.
Note
❒ Before you start printing, the
paper feed tray must be aligned
with the feeding position. If not,
a paper misfeed might occur.
E
Press the {Print Start} key to resume
printing.
AQP006S
39