AC PARALLEL OPERATION
Before connecting an appliance to either generator, make sure that the
appliance is in good working order and that its electrical rating does
not exceed that of the receptacle.
Most motorized appliances require more than their electrical rating for
startup. When an electric motor is started, the overload indicator (red)
may come on. This is normal if the overload indicator (red) goes off
within 4 seconds. If the overload indicator (red) stays on, consult your
generator dealer.
1.
Connect the parallel operation kit between the two EU3000is
generators following the instructions supplied with the kit.
2.
Start the generators (see page
indicator (green) on each generator comes on.
PARALLEL OPERATION KIT
(optional equipment)
22
) and make sure the output
OPERATION
29