Honda EU3000is Owner's Manual page 61

Battery Installation
1. Install the battery in the generator.
2. Connect the battery positive ( ) cable to the battery positive ( )
terminal first and tighten the bolt securely.
Slide the battery boot over the positive ( ) cable and terminal.
3.
4. Connect the battery negative ( ) cable to the battery negative ( )
terminal, and tighten the bolt securely.
5. Install the battery rubber and the battery holder band.
6. Install the front cover, and install the four 6 mm cap nuts, making
sure the four collared washers are placed in the rubber grommets
inside the cover.
BATTERY BOOT
POSITIVE ( )
CABLE
SERVICING YOUR GENERATOR
BATTERY HOLDER BAND
NEGATIVE ( )
CABLE
BATTERY RUBBER
59