OPERATION
EMERGENCY STARTING
If the recoil starter is not working
properly, you can start the engine
manually using the emergency starter
rope supplied with the tool kit.
ENGINE COVER
1.
Remove the engine cover.
28
RECOIL STARTER
5 mm NUTS
2.
Remove the three 5 mm nuts with
an 8 mm wrench and remove the
recoil starter.
3.
Set the controls the same as for
normal starting (see pages
27
). Use the choke control if
needed.
EMERGENCY STARTER ROPE
4.
Set the knotted end of the
emergency starter rope in the notch
in the flywheel pulley. Wind the
rope clockwise around the
flywheel pulley, as shown.
25
FLYWHEEL
PULLEY