Transom Angle Adjusting Bolt; Tilt Lever - Honda Marine BF2.3D Owner's Manual

CONTROLS AND FEATURES

Transom Angle Adjusting Bolt

ADJUSTING BOLT AND WING NUT
The transom angle adjusting bolt is
used to adjust the angle of the
outboard motor in the normal
operating position (see page
Loosen the wing nut to free the
adjusting bolt.
Adjust the angle of the outboard
motor, and tighten the wing nut. Be
sure that the bolt head and wing nut
are seated in one of the four recesses
in the adjustment slot.
16

Tilt Lever

REAR CARRYING HANDLE
FRONT CARRYING
HANDLE
The tilt lever enables the outboard
motor to be tilted for beaching,
launching, or mooring.
24 ).
Tilt the outboard motor by holding
the carrying handles, as shown. The
spring-loaded tilt lever will
automatically move into position and
hold the outboard motor when it
reaches approximately 75°.
75°
To return the outboard motor to the
normal running position, hold the
outboard motor and pull the tilt lever,
then slowly lower the outboard motor.
TILT LEVER