6. OPERATION
(POWER TRIM/TILT
TYPE)
LEVER
Tilt Lock Lever
Use the tilt lock lever when the boat is
moored.
1. Tilt the motor
up
as far as it will go
using the power trim/tilt switch.
2.
Move
the tilt lock lever to the LOCK
position and lower the outboard
motor until the lock lever contacts the
stem bracket (refer to page 25).
It may be necessary to lift the engine
cover grip slightly to swing the tilt lock
lever into the LOCK position.
3. To lower the motor, tilt the motor
up slightly, move the tilt lock lever
to the
FREE
position, and lower the
motor to the desired position.
66