Fuel Priming; Infrequent Or Occasional Use; Starting The Engine; Shg And Lhg Types (Long Tiller Handle) - Honda Marine BF25D Owner's Manual

OPERATION

FUEL PRIMING

If you are using a portable fuel tank,
turn the portable fuel tank vent knob
counterclockwise to the open
position.
UP
OUTLET END
(outboard motor side)
FUEL PRIMING
BULB
INLET END
(fuel tank side)
Hold the fuel priming bulb with the
outlet end higher than the inlet end.
Squeeze the priming bulb several
times, until it feels firm, indicating
that fuel has reached the carburetor.
Check to be sure there are no fuel
leaks before starting the engine.
Do not touch the priming bulb with
the engine running or when tilting up
the outboard motor. The carburetors
could overflow.
46
INFREQUENT OR
OCCASIONAL USE
If your outboard motor will be used
on an infrequent or intermittent basis,
please refer to the fuel section of the
STORAGE chapter (p. 90
additional information regarding fuel
deterioration.

STARTING THE ENGINE

SHG and LHG Types
(long tiller handle)
EMERGENCY STOP SWITCH
) for
EMERGENCY STOP
SWITCH LANYARD
1. Put the emergency stop switch clip
in the emergency stop switch, and
attach the emergency stop switch
lanyard securely to the operator or
to the operator's PFD (Personal
Flotation Device).
EMERGENCY STOP
SWITCH CLIP