Section 2: Circuit Requirements; Figure - Grizzly G0505 Owner's Manual

SECTION 2: CIRCUIT REQUIREMENTS

110V Operation
Serious personal injury could occur if you
connect the machine to power before com-
pleting the setup process. DO NOT connect
the machine to the power until instructed
later in this manual.
Electrocution or fire could
result if machine is not
grounded and installed in
compliance with electrical
codes. Compliance MUST
be verified by a qualified
electrician!
Full Load Amperage Draw
Power Supply Circuit Requirements
the wiring codes in your area or you plan to
connect your machine to a shared circuit, con-
sult a qualified electrician.
If you are unsure about
Power Connection Device

Figure 3

Figure 3.
This machine MUST have a ground prong in
the plug to help ensure that it is grounded.
DO NOT remove ground prong from plug
to fit into a two-pronged outlet! If the plug
will not fit the outlet, have the proper outlet
installed by a qualified electrician.
Extension Cords