GReddy Turbo Kit Installation Manual page 14

3-12 Suction Pipe Installation
1. Install the Airinx adapter on to the Airinx
filter housing.
2. Install the S-1 to the turbo inlet and
install the Airinx assembly to the S-1 as
shown.
(Parts used #7, 23, 26, 31, 32, 37)
3. Install the blow-by, and idle control
valve hose to the C-3 and S-1 as
shown.
(Parts used #19, 20, 28, 44, 45)
3-13 Injector and Fuel rail Installation
1. Cut the factory injector harness and
install the provided injector harness.
2. Install the Fuel Regulator fitting and fuel
rail fitting on to the rail using the
provided o –rings.
3. Install the factory fuel regulator to the
fitting on the new rail with provided
hardware.
4. Install the factory fuel regulator to the
fitting on the new rail with provided
hardware.
5. Install the provided injectors with the
new fuel rail assembly.
(Parts used #8, 9)
(Parts used # 49)
(Parts used #50, 52, 53)
(Parts used #54)
(Parts used #54)
(Parts used #48)