Connecting The Dp710 Charger Unit; Setting Up The Dp715/710 Handset; Figure 2: Connecting The Dp710 Charger Unit; Figure 3: Inserting The Batteries In The Handset - Grandstream Networks DP715 User Manual

CONNECTING THE DP710 CHARGER UNIT

To setup the DP710, follow the steps below:
Plug the 7V DC power adapter into an electrical outlet to start using the charger unit.
1

Figure 2: CONNECTING THE DP710 CHARGER UNIT

SETTING UP THE DP715/710 HANDSET

To setup the handset, follow the steps below:
1. Open the battery compartment (see below).
2. Insert the batteries in the correct polarity (+ and -).
3. Close the battery compartment.
4. To charge the rechargeable batteries for the first time, place the handset in the base unit or
charger unit for 16 hours.
3

Figure 3: INSERTING THE BATTERIES IN THE HANDSET

Firmware version 1.0.0.8
2
1
2
DP715/DP710 User Manual
1 Underside of the charger unit
2 Power supply plug
1. Battery compartment cover
2. Batteries
3. Rear of Handset
Page 11 of 53