Goldmund MIMESIS 28 User Manual

Goldmund MIMESIS 28 User Manual

Advertisement

GOLDMUND MIMESIS 28
POWER AMPLIFIER

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MIMESIS 28 and is the answer not in the manual?

Questions and answers

Richer
June 12, 2025

quelle utilisation des 2 fiches châssis banane verte et noir et de l'interrupteur à l'arrière du Menesis 28

Subscribe to Our Youtube Channel

Summary of Contents for Goldmund MIMESIS 28

  • Page 1 GOLDMUND MIMESIS 28 POWER AMPLIFIER...
  • Page 2 POWER AMPLIFIER USER MANUAL CONGRATULATIONS Thank you for purchasing the Goldmund Mimesis 28. You have acquired the best Analogue Power Amplifier ever made for professional and domestic uses. Please take some time to read this manual. It may provide you with useful information to make your pleasure of listening to the Mimesis 28 even higher.
  • Page 3 2 – CHOICE OF AMPLIFIER LOCATION AND COOLING The GOLDMUND MIMESIS 28 amplifier, as all high quality amplifiers generates a large amount of heat. It is mandatory to allow a proper cooling of the heat sinks. Avoid any location which is not properly vented and avoid to put on top of it equipment sensitive to temperature.
  • Page 4 The amplifier is non-inverting in phase. 5 – AMPLIFIER CONTROLS On the front plate of the GOLDMUND MIMESIS 28 amplifier you will find only two POWER keys. The two POWER keys have to be activated simultaneously to power the amp on.
  • Page 5 10 to 15 minutes. - Speaker polarity. Even if you have a phase inverter on your preamplifier (as on the GOLDMUND MIMESIS 2 or MIMESIS 22), and even if you have carefully selected the proper line...
  • Page 6 GOLDMUND representative readjust the DC offset. This very simple operation takes only two minutes and will...
  • Page 7 To clean your MIMESIS use only a soft cloth slightly wet. Always turn the power off before cleaning your amplifier. TECHNICAL DATA : POWER - Nominal power : 2 x 200 W RMS (2 - 8 Ohms). 2 x 100 W RMS (1 - 16 Ohms). - Maximum instantaneous power : >...
  • Page 8 POWER SUPPLY - Nominal line voltage : 117, 234 V (switchable). - Input voltage range : +/- 10 %. - Maximum power consumption : 1200 W. - Power used in standby : 100 W. - 4 toroidal transformers, 4 separated power supply. GROUNDING - Separated ground for each channel.

Table of Contents

Save PDF