Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Genelec HT320BC
Summary of Contents for Genelec HT320BC
- Page 1 HT320BC Operating Manual Genelec HT320BC Active 3-Way Speaker...
-
Page 2: Installation
(1") metal dome also loaded by a DCW . The cable connectors, a mains cable and an The Genelec HT320BC is a dedicated center HT320BC is magnetically shielded in order to operating manual. Once unpacked, place the channel loudspeaker for three channel (LCR) -
Page 3: Setting The Input Sensitivity
Figure 1. Location of the acoustic axis Figure 2. RAM5 amplifier panel layout Alternatively, pre-terminated lengths of Cable gauge Max. length cable are available from Genelec. 2,0 mm (14 AWG) 30 m (100 ft) Be sure not to mix the amplifier/loudspeaker... -
Page 4: Flush Mounting
(5-10 mm / ¼-½") position. In the horizontal plane the loud- Vertical / horizontal mounting speakers should be positioned according to FACING PANEL Genelec HT320BC can be mounted verti- the multichannel (ITU-R BS.775-1) place- FIXED TO THE WALL (50-100 mm / 2-4") WALL cally or horizontally. -
Page 5: Maintenance
Mode indicator LED Accessories Safety considerations The Genelec HT320BC is provided with a Order code three-colour indicator LED on the DCW™ Although the HT320BC has been designed Protective grille 1038-409BC panel. -
Page 6: System Specifications
The 'CAL' position is with all tone controls set to 'off' and input sensitivity control to maximum. www.genelec.com Genelec Document D0069R001a Copyright Genelec Oy 5.2008. All data subject to change without prior notice In Sweden please contact International enquiries: In the U.S. please contact:...
Need help?
Do you have a question about the HT320BC and is the answer not in the manual?
Questions and answers