Advertisement
Advertisement
Table of Contents
Related Manuals for Genelec HT324A
Summary of Contents for Genelec HT324A
- Page 1 HT324A Operating Manual Genelec HT324A Three-Way Active Loudspeaker...
-
Page 2: Installing The Amplifier
25 mm (1”) treble driver. The midrange the rear panel of the amplifier unit to allow for that the acoustical axis of the two loudspeak- and treble drivers are mounted in a Genelec the cable connectors. ers meet at ear height at the center of the Directivity Control Waveguide™... -
Page 3: Connecting Cable
Free standing in a All OFF -2 dB ON -1 dB ON All OFF All OFF be adversely affected. Genelec reverberant room approved cloth grilles are available). Flush mounted in a All OFF -4 dB ON -1 dB ON... - Page 4 Loudspeaker cabinet Fig 2.1 Horizontal configuration. Amplifier unit Allen key Loudspeaker Mains connector connecting cable LED connector Fig 1. The HT324A system. Fig 2.2 Vertical configuration. Fig 3. Speaker mounting. Fig 5. Eliminating discontinuities. Fig 4. Speaker mounting details. Fig 6. Recess for loudspeaker connectors. (Front view) Fig 7.
-
Page 5: Overload Indicators
Make sure that any sound reflecting objects REMEMBER to disconnect the power supply This is to certify that Genelec HT324A loud- such as chairs etc. are removed from the by removal of the mains cable before chang- speaker conforms to the following standards: close proximity of the loudspeaker. - Page 6 Width 483 mm (19") Depth 250 mm (9 ")* www.genelec.com Genelec Document D0072R001 Copyright Genelec Oy 1.2006. All data subject to change without prior notice In Sweden please contact International enquiries: In the U.S. please contact: In China please contact:...
Need help?
Do you have a question about the HT324A and is the answer not in the manual?
Questions and answers