Isl Group Member Attributes - Qlogic SANbox 9000 Series Interface Manual

A
Keywords
add [group]
Initiates an editing session in which to specify a group member and its attributes
for the existing group given by [group]. ISL, Port, and MS member attributes are
described in
and group type attributes are read-only fields common to all three tables.
Attribute
Member
Authentication
Primary Hash
Primary Secret
Secondary Hash
Secondary
Secret
Binding
59231-04 A
Table 15-2, Table 15-3, and
Table 15-2. ISL Group Member Attributes
Worldwide name of the switch that would attach to the switch. A
member cannot belong to more than one group.
Enables (CHAP) or disables (None) authentication using the Chal-
lenge Handshake Authentication Protocol (CHAP). The default is
None.
The preferred hash function to use to decipher the encrypted Pri-
mary Secret sent by the ISL member. The hash functions are MD5
or SHA-1. If the ISL member does not support the Primary Hash, the
switch will use the Secondary Hash.
Hexadecimal string that is encrypted by the Primary Hash for
authentication with the ISL group member. The string has the follow-
ing lengths depending on the Primary Hash function:
MD5 hash: 16-byte
SHA-1 hash: 20-byte
Hash function to use to decipher the encrypted Secondary Secret
sent by the ISL group member. Hash values are MD5 or SHA-1. The
Secondary Hash is used when the Primary Hash is not available on
the ISL group member. The Primary Hash and the Secondary Hash
cannot be the same.
Hex string that is encrypted by the Secondary Hash and sent for
authentication. The string has the following lengths, depending on
the Secondary Hash function:
MD5 hash: 16-byte
SHA-1 hash: 20-byte
Domain ID of the switch to which to bind the ISL group member
worldwide name. This option is available only if
FabricBindingEnabled is set to True using the
command. 0 (zero) specifies no binding.
15 – Command Reference
Table 15-4 respectively. The group name
Description
Set Config Security
Command Listing
15-31