Download Print this page

Filter Maintenance; Limited Warranty - Pullman Holt P10 Backpack Operation & Care Instructions

Hide thumbs


Filter Maintenance

Overfi lling the bag will result in loss of vacuum
effi ciency. The recommended bag replacement
procedure is as follows:
1. Shake out the paper dust bag as required.
2. Replace the paper dust bag when necessary,
Lift both paper dust bag and cloth bag out
at the same time to avoid ripping the paper
dust bag.
3. Hand or machine wash the cloth fi lter bag and
air dry. ( not put it in dryer)
Motor Inlet Filter Maintenance
1. Pull the fi lter guard (Item #1) off and remove
the motor inlet fi lter (Item #2). Shake it out,
rinse it and let it air dry thoroughly.
2. Replace the inlet fi lter if necessary,
3. Firmly snap the fi lter guard in place.
The vacuum cleaner is warrantied for 1 year from the date of purchase as
shown on your distributor's invoice. Parts not covered under warranty are
power cords, fi lters, motor brushes and squeegee blades. The warranty
covers only failure due to defective parts or workmanship and will be
invalidated by improper application and abuse.
Foam Exhaust Filter Maintenance
1. Pull out the rubber gasket (Item #19) and take
2. Rinse the foam exhaust fi lter (Item #20) and let
3. Place the rubber gasket (Item #19) into the


10702 N 46th Street • Tampa, FL 33617
(813)971-2223 • fax (813)971-6090
out the foam exhaust fi lter (Item #20).
it air dry thoroughly.
canister to support the foam exhaust fi lter (Item
#20) to support the foam exhaust fi lter (Item
#20) from falling down.
In NO circumstance should you return a failed unit to the factory. If you
experience any problems with your vacuum during the warranty period,
contact the Customer Service.