Important Safety Instructions - Precor 9.33 Owner's Manual

page 2

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be taken,
including the following:
• Read all instructions before using the M9.33 treadmill. These instructions
are written to ensure your safety and to protect the unit.
Before beginning any fitness program, you should obtain a complete physical
examination by your physician.
Il est conseillé de subir un examen médical complet avant d'entreprendre tout
programme d'exercise. Si vous avez des étourdissements ou des faiblesses,
arrêtez les exercices immédiatement.
DANGER
To reduce the risk of electrical shock always unplug the treadmill from the
electrical outlet immediately after using and before cleaning.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons, take the
following precautions:
• When it is plugged in, do not leave the M9.33 unattended. Unplug the
treadmill from the power source when it is not in use, and before putting on
or taking off parts.
• Do not allow children on or near the M9.33 treadmill.
• Use the M9.33 only for its intended purpose as described in this manual.
Do not use accessory attachments that are not recommended by the
manufacturer — such attachments might cause injuries.
• Never operate the unit if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped in water. Return
the M9.33 to a service center for examination and repair.
• Keep the power cord and plug away from heated surfaces.
• Never block the air vents while operating the treadmill. Keep the air vents
clean and free of lint, hair, or anything that might impede the free flow of air.
• Never drop or insert objects into any opening. Keep hands away from moving
parts.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
• When the treadmill is not in use, disconnect the unit by turning the power
switch to the OFF (O) position, then remove the power plug from the wall
outlet.
WARNING
Connect the M9.33 to a properly grounded outlet only. The M9.33 treadmill must be
connected to a 15 amp dedicated circuit. See Grounding Instructions on page 5.