Vcr Plus+ Channel Mapping 4 - Zenith SYSTEM 3 SY2738RK Operating Manual & Warranty

GEM4000 VCR PLUS+C3® REMOTE CONTROL
VCR PLUS+C3® MODE KEY FUNCTIONS
These descriptions apply to functions and operations of your remote control in VCR Plus+C 3 Mode. To select VCR Plus+ C 3 Mode,
press the VCR+ key on the remote. _k
/
After you have programmed your VCR Plus+C3remote,
set it down so it points in a clear path toward your
VCR and cable box.
Current Mode/Time Display
Displays the mode you are in and time, if
set. Note: Press any mode key twice to see
Clock/Date Display.
CABLE, VCR, AUX, TV
Selects remotecontrol's operationmode.
PRG (Program)
Begins VCR Plus+ C 3 Programming
Setup.
NUMBER KEY PAD
Selects channels directly.
CLOCK
Adjustsclock time in VCR+ or PRG modes.
ENTER
Enters channels; use where indicated when
programming.
CANCEL
In Review Mode, deletes a program
scheduled for recording.
ADD TIME
When programming for recording, each
press extends recording time 15 minutes.
VCR+
Enters VCR Plus+ C3 recording mode.
ONCE, WEEKLY, DAILY
Specifies recordingoptions.
VCR Plus+ C 3 Operations
REVIEW
Shows programs scheduled for recording
or to view any modifications to the VCR
Plus+ Channel Mappings.
VCR Plus+ is a registered trademark of Gemstar Corp.
VCR Plus+ C3® system is manufactured under license from Gemstar Development Corp.
3130A-O 4 -- 6