Standard Connections For Your Tv; Connection Center; Connection Options - Zenith SYSTEM 3 SY2738RK Operating Manual & Warranty

STANDARD CONNECTIONS FOR YOUR TV
CONNECTION CENTER
VARIABLE AUDIO OUTPUT
Connect these jacks to the auxiliary input
jacks of a stereo amplifier to listen to your
TV through your stereo system.
SPEAKER EXT/INT
Select EXT (external) to remove sound
from the TV's speakers. (You must now
listen to TV sound using your stereo sys-
tem, via the Variable Audio Output jacks.)
Select INT (internal) to listen to your TV
using the TV's (internal) speakers.
(If a stereo amplifier is connected to the
Variable Audio Output jacks, you hear the
audio from the TV's speakers and your ste-
reo system at the same time.)
AUX INPUT
Jacks for external audio and video input
from a stereo VCR or other A/V appli-
ance. (You must connect to these jacks in
order to hear stereo sound when using the
AN appliance.)
If you connect a single audio plug (from a
monaural A/V appliance) to the MONO
jack, monaural sound is directed to both
of the TV's speakers.
ANTENNA/CABLE
75-ohm antenna or cable-TV connection
to your TV. Attach your antenna, cable-
TV line or VCR to this jack.
CONNECTION OPTIONS
Your TV may be connected in many different ways. The following illustrations show the most common, and recommended connec-
tions for your new TV.
SETUP 1: ANTENNA ORDIRECT CABLE
If you receive your television signal by antenna or direct cable
(no cable box), connect your television as follows:
Leading from.. Connects to..
A 75-ohm (round) cable ANTENNA/CABLE
from Antenna or cable- connector on TV.
TV wall jack.
Not required. B&C
NOTE:
El If your antenna has a flat (300-ohm) wire leading from it, you
will have to attach this wire to a 300-75 ohm adapter before
the antenna can be connected to the TV.
SETUP 2: CABLE BOX
If you receive your television signal from a cable box, connect
your television as follows:
A Not required.
B 75-ohm cable from
Cable-TV wall jack.
C 75-ohm cable from
output connector of
cable box.
Input connector of cable
box.
ANTENNA/CABLE
connector on TV.
TURN OFF POWER OR UNPLUG TV
BEFORE MAKING ANY CONNECTION!
# ..... ............ i
, Flat wire :
i .....
: from antenna :
CABLEA
' /
SETUP 1 and SETUP 2
3oso-B 1 -- 1