Table of Contents
Advertisement
Control up to seven different devices with your remote
Refer to the chart on page 46/47 to find the type and brand
name of the device you're programming.
Press and hol,dPRGuntil, the indicator l,ight turns on, then
tel,easePRG.
PressAUX and the 1 on the NUMBER keypad at the same
time (for AUX +I).
Using the NUMBER keypad, enter the three-number code for
the device you've sel.ected.
Press ENTER to save the code.
With the device turned on, point the remote at it and press
POWER. It shoul,d turn off.
Repeatthesteps forAUX+2,and AUX+3.
Programming your Zenith remote may allow you to use one remote to
work up to 7 different products or devices.
Some devices may not workwith your Zenith remotecontrol,
AUX
Auxiliary equipment,
Can be any equipment which does not have a dedicated
key on your remote like Cab|e or VCR.
Typicatty a secondVCR, s tereosystem,audiotape deck,etc.
PAGE
45
Advertisement
Table of Contents
