Zenith IQB27B44 Operating Manual & Warranty page 42

Choosing sources to watchfor theMain picture
and the PIP Insetpicture
Press PIP to place thePIPinset on the mainscreen.
Press I_//_JCR Source on remotecontrol t o switch input
source forthe PIPinset.
Or,go to theSourcemenu, highlight PIPSource and use
RIGHT/LEFT arrows to setect PIPinset source. H ighlight
Main Source and useRIGHT/LEFT arrows to select main
picture s ource.
Main Screen or PIPInset Sources
You can use:
Antenna/Cabte
VideoI/S-Video 1
Video2/S-Video 2 etc.
COMPONENTVIDEO
ce9°°9"9 L9
@ 9 9 LglgL
PIP Source
Can be Antenna/Cableand
any componentconnectedto
any setofaudio/video input
jacks; suchas VideoI,Video
2,S-Video I,S-Video 2,etc.
Where"sources" areconnected
"_F~
canuseany input source.for thePIPinset thatis ~'"",,,,,
You
connected t o theTVconnections panel. (Antenna/Cable,
15deo1, or Video2 etc.)
Note: If you usedthe S-VideoI, or the
S-Video2 input, S-VHS1, or S-VHS2 will appearas avail-
able sources instead of Video1, or Video2.
I/no equipment isconnected t o a sour_e y ou select for
thePIP inset, or if it isturned Off, thePIPinset will b e
black.
Main Picture Source
Can be Antenna/Cable a nd
any componentconnected to
any setofaudio/video input
jacks; suchasVideoI,Video
2,S-Video I,S-Video 2,etc.
Camcorder
Typical Component Sources
PAGE 42 2o_34a3