Inserting Memory Cards - FujiFilm IS Pro Owner's Manual

Inserting Memory Cards

Photographs are stored on CompactFlash/Microdrive
(available separately).
In this manual, "Memory card" means CompactFlash
memory card (CF card)/Microdrive.
Z Available CompactFlash/Microdrive
The following cards have been tested and approved for
use with the IS Pro:
• SanDisk
SDCFH
(Ultra u)
SDCFX
(Extreme )
• Microdrive 1GB, 2GB, 4GB, 6GB
CAUTION
Operation is not guaranteed with other makes of card. For
more details on the above cards, please contact the
manufacturer.
1
Set the power switch to OFF to turn the
camera off (➝p.36).
Check the access lamp is off.
2
Turn the card slot cover latch to open the
slot cover.
Card slot cover latch
34
512MB, 1GB, 2GB, 4GB
1GB, 2GB, 4GB
CAUTION
Never open the slot cover while the camera is on.
This could destroy the image data or damage the memory
card itself.
3
Insert the card as shown below.
The access lamp will light for about a second.
Front
CAUTION
Confirm that the memory card is in the orientation shown.
Attempting to insert cards upside down or backward could
damage the camera or card. Do not use excessive force.
4
Close the slot cover.
Removing memory cards
Open the slot cover, press the eject
button and remove the memory
card.
Front
Terminals