Shooting - FujiFilm IS Pro Owner's Manual

U SET UP

SHOOTING

IMAGE COMMENT
User comment of up to 45 characters (EXIF) can be
entered when [TYPE IN/BARCODE] is set.
[TYPE IN/BARCODE]
Manually enter or edit a comment of up to 45
characters (EXIF) by using the [INPUT COMMENT]
screen (➝p.147). Data read using the [OFF/BCD
MULTI READ] will be erased.
The maximum number of characters is 45 when
reading a barcode with the [BCR 1 SHOT] or [BCR
CONTINUOUS] selected under [BARCODE READER/
GPS]. In this case, the comment will be overwritten at
each barcode reading.
[OFF/BARCODE]
A comment manually entered by using the [INPUT
COMMENT] screen will not be recorded when [OFF/
BARCODE] is set (➝p.147).
The maximum number of characters is 45 when
reading a barcode with the [BCR 1 SHOT] or [BCR
CONTINUOUS] selected under [BARCODE READER/
GPS]. In this case, the comment will be overwritten at
each barcode reading.
[OFF/BCD MULTI READ]
A comment manually entered by using the [INPUT
COMMENT] screen will be erased when [OFF/BCD
MULTI READ] is set (➝p.147).
The maximum number of characters is 248 when
reading barcodes. Separate comments with comma (,)
semicolon (;) or ampersand (&) when reading multiple
barcodes.
146
How to use the SET UP menu (➝p.138)
Z Manually enter a comment
1
Activate [IMAGE COMMENT].
IMAGE COMMENT IMAGE COMMENT
TYPE IN/BARCODE TYPE IN/BARCODE
OFF/BARCODE OFF/BARCODE
OFF/BCD MULTI READ OFF/BCD MULTI READ
A Press n or o to select [TYPE IN/
BARCODE].
B Press q.
MEMO
• If [TYPE IN/BARCODE] is selected, a comment is
added to all photographs taken.
• To not add a comment, select [OFF/BARCODE] or
[OFF/BCD MULTI READ].