Table of Contents
Advertisement
When the camera establishes communication with a GPS
device, a
icon will be displayed in the control panel.
The exposure meters will not turn off while this icon is
displayed. Photo information for pictures taken while the
icon is displayed will include an additional page
recording the current latitude, longitude, altitude, and
Coordinated Universal Time (UTC). If no data is received
from the GPS unit for two seconds, the
from the display and the camera will stop recording GPS
information. Also, the auto power save function will not be
performed while the camera is communicating with a GPS
device.
MEMO
• UTC data is provided by the GPS device and is
independent of the camera clock.
• GPS data is only recorded when the
displayed. Confirm that the
control panel before shooting. A flashing
indicates that the GPS device is searching for a signal;
pictures taken while the
include GPS data.
icon will clear
icon is
icon is displayed in the
icon
icon is flashing will not
How to use the SET UP menu (➝p.138)
SHOOTING SPEED
Choose the rate (2 frames/s or 1 frame/s) at which
pictures can be taken in continuous low-speed mode.
MEMO
The frame advance rate may drop at slow shutter speeds
and at [
D-RANGE] setting other than [100% (STD)].
EXPOSURE DELAY MODE
Select [ON] to delay shutter release until about 0.4 s after
the shutter button is pressed, reducing camera shake in
situations in which the least camera movement could
result in blurred photographs (for example, microscope
photography).
SELF-TIMER
See p.101 for details.
QUICK PREVIEW DATA
Normally, select [ON] to playback images quickly in the
LCD monitor (or [OFF] to playback images slowly). With
any software application, If you encounter some
difficulties with playback or printing of images with [ON]
selected, select [OFF].
149
Advertisement
Table of Contents
