FujiFilm Finepix XP60 series Owner's Manual page 115

Problem Problem
Some fl ash modes are Some fl ash modes are
not available. not available.
The fl ash does not fully The fl ash does not fully
light the subject. light the subject.
Pictures are blurred. Pictures are blurred.
Pictures are mottled. Pictures are mottled.
Vertical lines appear in Vertical lines appear in
pictures. pictures.
"Smear" in the form of "Smear" in the form of
vertical purple or white vertical purple or white
lines appears in the lines appears in the
display. display.
Sounds made by the Sounds made by the
camera are recorded with camera are recorded with
movies. movies.
Troubleshooting
• • The desired fl ash mode is not available in the current shooting mode The desired fl ash mode is not available in the current shooting mode: Choose a diff erent
P 24).
shooting mode ( shooting mode (P 24).
• • The camera is in silent mode The camera is in silent mode: Turn silent mode off (
• • The subject is not in range of the fl ash The subject is not in range of the fl ash: Position the subject in range of the fl ash (
• • The fl ash window is obstructed The fl ash window is obstructed: Hold the camera correctly (
• • The protective glass covering the lens is dirty The protective glass covering the lens is dirty: Clean the glass (
• • The protective glass covering the lens is blocked The protective glass covering the lens is blocked: Keep objects away from the lens (
• • s s is displayed during shooting and the focus frame is displayed in red
is displayed during shooting and the focus frame is displayed in red: Check focus
P 100).
before shooting ( before shooting (P 100).
• • k k is displayed during shooting
is displayed during shooting: Use the fl ash or a tripod (
• • A slow shutter speed is selected at high temperatures A slow shutter speed is selected at high temperatures: This is normal and does not indi-
cated a malfunction. cated a malfunction.
• • The camera has been used continuously at high temperatures or a temperature warn- The camera has been used continuously at high temperatures or a temperature warn-
ing is displayed: Turn the camera off and wait for it to cool down. ing is displayed : Turn the camera off and wait for it to cool down.
The camera has been used continuously at high temperatures. Turn the camera off and wait for The camera has been used continuously at high temperatures. Turn the camera off and wait for
it to cool down. it to cool down.
Vertical purple or white lines may appear after the camera has been used continuously at high Vertical purple or white lines may appear after the camera has been used continuously at high
temperatures or when a very bright object is in the frame; this phenomenon is common to all CCD temperatures or when a very bright object is in the frame; this phenomenon is common to all CCD
image sensors and does not indicate a malfunction. These lines are recorded in movies but do not image sensors and does not indicate a malfunction. These lines are recorded in movies but do not
appear in photographs. Avoid framing bright objects when fi lming movies. appear in photographs. Avoid framing bright objects when fi lming movies.
• • u u CONTINUOUS
CONTINUOUS is selected for
( ( P P 71).
71).
• • Zoom was adjusted during shooting Zoom was adjusted during shooting: Do not adjust zoom during shooting.
• • Intelligent Face Detection is on Intelligent Face Detection is on: Turn Intelligent Face Detection off (
Solution Solution
: Turn silent mode off (P
: Position the subject in range of the fl ash (P
: Hold the camera correctly (P
: Use the fl ash or a tripod (P
is selected for F F MOVIE AF MODE
MOVIE AF MODE: Select a diff erent AF mode
: Do not adjust zoom during shooting.
: Turn Intelligent Face Detection off (P
Problems and Solutions
: Choose a diff erent
P 82). 82).
P 20).
20).
: Clean the glass (P P 93). 93).
: Keep objects away from the lens (P
P 40).
40).
: This is normal and does not indi-
: Select a diff erent AF mode
P 34).
34).
P 107).
107).
P 20).
20).
: Check focus
97