FujiFilm Finepix XP60 series Owner's Manual page 11

Product Features and Precautions for Use Product Features and Precautions for Use
■ ■ Water, Dust, and Shock Resistance
Water, Dust, and Shock Resistance
Q The camera complies with JIS Class 8 water resistance and JIS Class 6 (IP68) dust resistance
standards, and has passed FUJIFILM drop tests (drop height: 1.5 m/4.9 ft.; impact surface: ply-
wood, thickness 5 cm/2.0 in.) compliant with MIL-STD 810F Method 516.5: Shock. These results
were obtained through in-house testing and are not a blanket guarantee of water resistance
or invulnerability to damage or destruction. The accessories supplied with the camera are not
water resistant.
■ ■ Before Use
Before Use
1
Inspect the water-resistant seal and adjacent surfaces and remove
any dust, sand, or other foreign matter using a soft, dry cloth.
Q Have the water-resistant seal replaced if it is deformed or other-
wise damaged (note that a fee is charged for this service; contact
your retailer or a FUJIFILM-authorized repair technician for more
information). Failure to replace the seal could result in leaks and
damage to the camera.
2
Holding the battery-chamber cover closed against the cam-
era body ( q ), rotate the latch until it clicks into place ( w ),
indicating that the cover is secure.
3
Check that the cover is secure by rotating the latch in the opposite direction and confi rming
that the cover does not open.
xi