Pnp/Pci Configurations - Foxconn 760GXK8MB series User Manual

Hide thumbs Also See for 760GXK8MB series:
Table of Contents

Advertisement

PnP/PCI Configurations

vReset Configuration Data (Default: Disabled)
This option is used to set whether the system is permitted to automatically
distribute IRQ DMA and I/O addresses when each time the machine is turned
on.
vResources Controlled By (Default: Auto <ESCD>)
This option is used to define the system resource control scheme. If all cards
you use support PnP, then select Auto (ESCD) and the BIOS will automatically
distribute interruption resources. If the ISA cards you installed not supporting
PnP, you will need to select "Manual" and manually adjust interruption re-
sources in the event of hardware conflicts. However, since this motherboard
has no ISA slot, this option does not apply.
vIRQ Resources
Press the <Enter> key, then manually set IRQ resources.
vPCI/VGA Palette Snoop (Default: Disabled)
If you use a non-standard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g., colors not accurately displayed).
vRaid Card Boot First (Default: Disabled)
This option is used to set Raid card boot first.
PnP/PCI Configurations Menu
Chapter 3 BIOS Description
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents