Other Connectors - Foxconn 955X7AA series User Manual

Other Connectors

This motherboard includes connectors for FDD devices, IDE HDD devices,
Serial ATA devices, USB devices, IR module, and others.
FDD Connector: FLOPPY
This motherboard includes a standard
FDD connector, supporting 360 K, 720 K,
1.2 M, 1.44 M, and 2.88 M FDDs
refer to the item 26 of motherboard
layout on chapter 1).
IDE Connectors: IDE1, IDE2, IDE3
This motherboard implements three IDE connectors: IDE1, IDE2, IDE3. IDE1
connector supports the provided Ultra DMA 100/66/33 IDE hard disk ribbon
cable. IDE2/3 connectors support up to four Ultra DMA 133/100/66 IDE hard disk
drives that you can configure as a disk array through onboard IDE RAID controller.
Refer to RAID manual (in Utility CD) for details on how to set up RAID
configurations.
Connect the cable's blue connector to the IDE connector, then connect the gray
connector to the Ultra DMA slave device (hard disk drive) and the black con-
nector to the Ultra DMA master device (Please refer to the items 17&25 of
motherboard layout on chapter 1).
1
ATA 133/100/66 IDE2/3
Chapter 2
(Please
1
955X7AA Series User Manual
Installation Instructions
FDD connector
1
ATA 100/66/33 IDE1
1
19