Running An Automatic Test Program - Fluke Biomedical Index 2MF User Manual

Index 2MF
Users Guide
3. Press YES to save your program, or NO to skip.

Running an Automatic Test Program

You can run a saved program at any time with the following procedure:
1. Start at the Autosequences menu.
8-14
If you press YES, you will see a message indicating your program is being
saved:
If you press NO, you will be returned to the Autosequences menu without saving
the new program (or without saving modifications to an existing program,
whichever applies):
Press RUN to display the "RUN:" screen.
esl113.eps
esl114.eps
esl115.eps
esl116.eps
esl117.eps