Table of Contents
Advertisement
i
Flashing
signal lights
The signal lights will flash rapidly in order
when your dishwasher is first installed and
connected to electricity, The signal lights will
also flash following a power failure. Press
the CANCEIJDRAIN
pad twice to clear the
signal lights.
PRESS TWICE
Cycle
selection
chart
Cycle
Pots & Pans
A double wash for maximum
cleaning of cooked-on or baked-on
foods.
NOTE: The cycle pauses to heat
water to 135°F (57°C) in both
washes (marked it) and in the final
rinse (marked _). See page 13,
Heavy Wash
A double wash for cleaning heavily
soiled loads.
NOTE: The cycle pauses while
the dishwasher heats water to
135°F (57°C) in the final rinse
(marked 1").If the Hi-Temp Wash
option is selected water will also
be heated in the main wash
(marked 11"). See page 13.
Normal Wash
A double wash for normal, every-
day soiled loads. (The Energy
Guide Label is based on this
cycle.)
NOTE: The cycle pauses while
the dishwasher heats water to
135°F (57°C) in the final rinse
(marked 1). If the Hi-Temp Wash
option is selected water will also
be heated in the main wash
(marked 1"1"). S ee page 13.
A _," shows what steps are in each cycle
Main
Wash Rinse Wash Rinse Rinse
Dry
•
ot
01"1"
•
e_
•
•
oi"I"
•
et
•
•
e1"t
•
et
•
Cycle
Time
(Minutes)
76*
76*
6*
*Cycle time includes heated dry time. Cycle time may vary depending on the temperature of
the water entering the dishwasher,
continued on next page
11
Advertisement
Table of Contents
