Table Of Contents; Using Your Dishwasher For The First Time - Whirlpool DU9400XB1 Use And Care Manual

Control panel
Signal lights
Using Your Dishwasher
In This Section
Page
Using your dishwasher for the first
time ..................................................... 5
Before starting your dishwasher ...... 6
Starting your dishwasher .................. 6
Starting your dishwasher using
delay wash .......................................... 6
Using cycle pause .............................. 7
Changing a cycle setting ................... 8
Adding a dish during a cycle ............. 8
The CANCEL/DRAIN pad ................... 9
Control panel lock-out feature .......... 9
Adjusting the beeping sound ............ 9
Page
Tfe WATER HEATING signal light ..10
Tf e CLEAN signal light .................... 10
Fhshing signal lights ....................... 11
Cycle selection chart ........................ 11
Wlat happens in each option .......... 12
U.¢ing the detergent dispenser ........ 14
U._ing the rinse agent dispenser ..... 15
Quiet operating tips .......................... 16
W;lter temperature tips .................... 17
Er ergy saving tips ............................ 17
Sl:ecial tips on dishwasher use ...... 18
Operating your dishwasher properly enables you to obtain the best possible results. This
section explains proper dishwasher operation.
Using your dishwasher the first time
• When your dishwasher isfirst
installed, the signal lights will
flash rapidly in order. The
signal lights will also flash
after a power failure. Press
the CANCEL/DRAIN pad twice to clear the
signal lights.
• Five control pads and the signal lights
allow you to set and check the
dishwasher's function.
• ,a "beep" sounds each time a pad is
pressed under normal conditions.
• The dishwasher is preset for the Normal
c/cle with the Heat Dry option. After each
u_e, the dishwasher remembers the last
c fcle and options used. The next time the
d splay is lit up for selection, it will show
the last selection that was used.
5