Mounting The Camera In The Housing - Fantasea FE 330 Manual

Mounting the Camera in the Housing

Remove the Lens Cap and Wrist Strap:
Make sure the camera lens to body orientation is set so the LCD screen is at top view with lens at the
extended position.
Attach the Plastic Slide Plate:
Attach the plastic slide plate to the camera's tripod mounting fixture with a coin, screw driver or the
end of the universal tool supplied [Figure 3]. Take care not to excessively tighten the screw. Secure
the zoom function guide on the lens zoom bezel [Figure 4], pointing the guide right into the slot of the
gear ring on housing bezel [Figure 5].
Attach the Zoom Control Guide Band:
Attach the Zoom Control Guide Ring to the lens. This is attached using the Velcro strip. Insure that
the projected nub is directly on the bottom.
o The Camera and tray are inserted in such a way that the nub of the
Zoom Control Guide Ring is sandwiched between the two projections
found on the lens port. All are pointed a downward direction. The Zoom
Control is operated when camera is installed in housing is this manner
using button #11
F 3: M
IGURE OUNTING
F
IGURE
P S P
LASTIC IDE LATE
5: P G
OINTING UIDE INTO
F 4: T Z
IGURE APING OOM
S G
LOT OF EAR
11
F G
UNCTION UIDE
R H
ING ON OUSING