Table of Contents
Advertisement
6
Drive and AEL/AFL button:
Dual purpose button to operate 2 buttons:
Drive—sets the single-frame/sequential shooting, remote control and self timer
AEL/AFL button—locks focus and exposure settings prior to shooting.
7
OK button:
Selects [confirms] selection. Used to set and confirm changes to the multi control settings of
the multipurpose button [button #8].
8
Multi Selector button:
This button controls the multi-functional button. Functions include: Metering button, White
balance button, Auto Focus button and ISO button.
9
Playback/Delete button:
Another instance in which this button acts upon 2 camera buttons.
Playback displays the last picture taken.
Playback the image you want to delete and press the Delete button. To confirm deleted
selection, press the OK button [button #7].
10
Menu/Info button:
Pressing the Menu button displays the menu on the monitor. Use the multi selector button to
make a selection [button #8] and confirm the selection with the OK button [button #7].
If the Control Panel screen does not appear, pressing this button [Info] will cause the
information to appear.
11
Zoom Control:
This button activates the zoom lens of the camera. Refer to the section called "Attaching the
Zoom Control Guide Ring" for further information.
12
Sync Port Bulkhead:
5 pin sync port for attaching sync cord to camera housing.
13
Pressure Release Plug:
Unique pressure release plug used to open or seal camera housing.
6
Advertisement
Table of Contents
