Whirlpool ACM082PS7 Use & Care Manual page 10

Hide thumbs

Advertisement

To raise the temperature:
Press the plus button to raise the temperature.
Each time you
press or hold the plus button, the temperature will go up 1° until it
reaches 86°F (30°C).
To lower the temperature:
Press the minus button to lower the temperature.
Each time you
press or hold the minus button, the temperature will go down 1°
until it reaches 64°F (18°C).
To sot Timer for a 1- to 24-hour delay before air conditioner
is turned off (air conditioner must be On):
1. Press TIMER. Indicator light on air conditioner control panel
will flash.
2. Press the plus or minus button to change the delay time from
1 to 24 hours,
3. Press TIMER again or wait 10 seconds. Indicator light on air
conditioner
control panel will remain on.
To set Timer to turn on air conditioner,
keeping
previous
settings:
1. Turn off air conditioner.
2. Press TIMER. Indicator light on air conditioner
control panel
will flash.
3. Press the plus or minus button to change delay time (1 to
24 hours).
4. Press TIMER again or wait 10 seconds. Indicator light on air
conditioner
control panel will remain on.
To set Timer to turn on air conditioner,
changing
the
previous sottings:
1. Turn on air conditioner.
2. Adjust Mode to Cool, Fan Only, or Power Saver.
3. Adjust Fan Speed to Turbo, High or Low, or Auto.
4. Adjust temperature between 64°F (18°C) and 86°F (30°C).
5. Turn off air conditioner.
6. Press TIMER. Indicator light on air conditioner
control panel
will flash.
7. Press the plus or minus button to change delay time (1 to
24 hours).
8. Press TIMER again or wait 10 seconds. Indicator light on air
conditioner
control panel will remain on.
Model 1
FAN
Cooler
Warmer
I
Closed
I
3
Cool
*,4ed
4
Cool
SPEED
TEMPERATURE
Open
Model 2
Cooler
Warmer
1
Model 3
FAN
SPEED
TEMPERATURE
Cooler
Warmer
I
Turbo
4
Cool
FAN
SPEED
TEMPERATURE
1. Set exhaust control. See "Exhaust Control (on some
models)."
2. Select the fan speed. See "Fan Speed."
3. Set temperature.
See "Temperature."
Exhaust Control
(on some models)
The Exhaust control CLOSED for maximum continuous cooling.
The Exhaust control set to OPEN allows you to draw stale or
smoky air from the room.
Open--to
exhaust room air to the outside.
Closed--to
circulate room air.
CLOSED
OPEN
NOTE: The Exhaust control will function only when the Fan
Speed is operating.
10

Hide quick links:

Advertisement

loading

  Related Manuals for Whirlpool ACM082PS7

Table of Contents