Assembly; Preparing Pressure Washer For Use; Remove Pressure Washer From Carton; Carton Contents - Troy-Bilt 020245-1 Owner's Manual

ASSEMBLY
iMPORTANT: Read entire owner's manuaH beforeyou
attempt to assemble or operate your new pressure washer.
Remove Pressure Washer From
H. Remove the parts bag, accessoNes, and inserts incHuded
with pressure washer.
2. SHice two corners at the end of carton from top to
bottom so the paneH can be folded down fiat.
3. Remove pressure washer from carton.
Carton Contents
items in the carton include:
Hain Unit
Handle
High Pressure Hose
Spray Gun
NozzHe Extension with Quick Connect Fitting
PHasticAccessory Tray
Safety Goggles
OH Bottle
Turbo Nozzle with Quick Connect
Parts Bag (whch incHudes the following):
Owner's HanuaH
Engine HanuaH
Owner's Registration Card
Bag containing 4 muHti-coHored ProjectPro TM
NozzHes
HandHe/Tray Fastening Hardware Kit (which
includes):
Carriage Bolts (2)
"L" BoHt
PHastic Knobs (3)
Tree CHips (4)
PREPARING PRESSURE
WASHER FOR USE
If you have any probHems with the assembHy of your
pressure washer or if parts are missing or damaged, call the
pressure washer heHpHine at J=888=6 [ J=67@8. [f caHHing f or
assistance, pHeasehave the model revision, and seriaH
number from the data tag available.
To prepare your pressure washer for operation, you
will need
to
perform these
tasks:
H. Firthout and send in registration card.
2. Attach handHe to main unit, then attach accessory tray
to handHe.
3. Add oiH to engine crankcase.
4. Add fueH to fueH tank.
S. Connect high pressure hose to spray gun and pump.
6. Connect water suppHy to pump.
7. Attach nozzHe extension to spray gun.
8. SeHect/attach quick connect ProjectPro TM nozzHe to
nozzHe extension.
Attach
Handle and Accessory Tray
H, Place handle onto handle supports connected to main
unit. Hake sure holes in handle aHignwith holes on
handle supports (Figure H).
NOTE:
It may be necessary to move the handHe supports
from side to side in order to aHignthe handHe so it wiHHsHide
over the handHe supports,
O